This multi-heads stone cnc router comes in dual-, triple-, and four-head layouts on 1325 (4×8 ft) or 5×10 heavy-duty beds. Each unit runs 2–4+ water-cooled spindle motors (5.5–7.5 kW) under NC-Studio or Syntec control, with an optional 5 axis upgrade, flood cooling, and a stainless sink — built for batch engraving and cutting of granite, marble, and quartz.
China Multi-Heads Stone CNC Router — Multi-Spindle Configurations
Multi-Spindle Lineups & Heavy-Duty Platforms
Standard dual-head through custom four-head pneumatic layouts match batch size without expanding floor space.
- Double Spindle Granite CNC Engraver: Dual-head setup for simultaneous dual-slab processing — doubles hourly output on repeatable designs.
- Multi-Head Marble Engraving Machine (3-Head / 4-Head): Pneumatic setups for rapid tool switching or multi-piece batch production without manual downtime.
- Standard 1325 Footprint: Classic 4×8 stone CNC machine bed size for standard slab dimensions and typical shop layouts.
- Expanded 5×10 Heavy-Duty Platform: Ultra-rigid chassis for oversized architectural slabs and dense natural quartzite.
| Machine Model / Config | Bed Size (Feet) | Primary Application | Best For |
|---|---|---|---|
| ProMach Dual-Head | 4×8 (1325) | Simultaneous Dual-Slab Processing | Monument & Tombstone Batches |
| ProMach Multi-Head (3+) | 5×10 | Multi-Spindle Custom Configurations | Architectural Molding & Reliefs |
| ProMach Heavy-Duty XL | 5×10+ | Large-Scale Slab Machining | Quartz Countertop Fabrication |
Heavy-Duty Specifications of Our China Multi-Heads Stone CNC Router
The china multi-heads stone cnc router lineup is built for structural survival under heavy stone slabs — thick-walled steel, sunken beds, and vibration-free heavy duty motion hardware for continuous fabrication shifts.
Rigid Sunken Bed Structure
A heavy-duty, industrial-grade sunken bed structure welded from thick-walled steel tubes keeps the center of gravity low, stabilizing massive marble and granite slabs during high-speed carving.
High-Torque Water-Cooled Spindles
Each unit runs 5.5 kW to 7.5 kW water-cooled CNC spindle for stone setups — high-torque motors that hold cutting power without overheating during extended 3D stone relief engraving cycles.
Advanced Kinetic Systems
Taiwan Hiwin linear guide rails paired with precision helical rack-and-pinion drives deliver smooth motion and minimal backlash on intricate designs.
Cooling & Environmental Shielding
Stone fabrication creates abrasive slurry — comprehensive flood cooling systems, splash guards, and stainless-steel water sinks channel waste away from critical components.
Industrial Control & Automation
NC-Studio or upgraded Syntec industrial control interfaces support multi-spindle coordination and resume cutting after power interruptions.
Key Technical Specifications
| Component | Standard Configuration | Optional Upgrades |
|---|---|---|
| Spindle Power | Dual/Multi 5.5 kW Water-Cooled | 7.5 kW High-Torque Spindle |
| Guide Rails | Taiwan Hiwin Linear Rails | Heavy-duty 30mm Rails |
| Driving System | Helical Rack & Pinion (X/Y), Ball Screw (Z) | Servo Motor System |
| Control System | NC-Studio | Syntec Industrial Controller |
| Bed Structure | Rigid Sunken Steel Bed | Customized Reinforced Platform |
| Cooling System | Stainless-Steel Water Sink & Pump | Automatic Oil Lubrication |
Rotary Saw, 5 Axis & Multi-Head Cutting Options
High-volume shops often pair multi-spindle engraving with fast straight cutting before profile work — a dedicated rotary saw head rough-cuts slab blanks, then independent spindle arrays finish V-carve and 3D relief passes. Optional 4th-axis rotary attachments handle columns and balusters; select builds add 5 axis interpolation for compound angles on architectural moldings (SERP-aligned upgrade path for mixed stone and panel jobs).
Add-on Upgrades for Maximum Versatility
- 4th-Axis Rotary Axis Attachment: Turning stone pillars, balusters, and 3D columns.
- High-Speed Rotary Saw Cutting Heads: A CNC stone router with rotary saw attachment fast-cuts straight slabs before detailed profile engraving.
Primary Industrial Applications & Material Compatibility
The china multi-heads stone cnc router lineup handles high-volume stone and panel work where single-spindle bottlenecks erode margins — multi-head machining cuts, carves, and shapes multiple pieces simultaneously to raise daily output without sacrificing detail.
Material Versatility
Heavy-duty multi-head marble engraving centers process soft decorative slabs through the hardest architectural surfaces:
- Hard Natural Stones: Granite, marble, quartzite, and sandstone.
- Engineered Surfaces: Quartz, porcelain slabs, and sintered stone.
- Panel & Wood Substrates: High-density composites, artificial stone, thick glass, and woodwork panels for mixed furniture making and stone inlay programs (verify tooling per material).
Key Applied Fields
| Application Field | Common Uses & End Products | Key Machine Benefit |
|---|---|---|
| Monument & Funerary Art | Granite tombstone carving equipment, detailed 3D reliefs, headstones, and memorial plaques. | Independent dual-spindle granite CNC engraver setups run identical V-carve profiles simultaneously. |
| Architectural Stonework | Fireplace mantels, pillars, column capitals, balusters, and intricate wall panels. | 4th-axis rotary stone CNC attachments support 360-degree 3D relief engraving projects. |
| Countertop & Kitchen Fabrication | Quartz countertop fabrication router tasks, sink cutouts, edge profiling, and backsplashes. | High-torque water-cooled spindle for stone delivers chip-free edges on premium kitchen surfaces. |
| Furniture & Mixed Panel Work | Stone tops, decorative inlays, and furniture making components that combine woodwork with stone accents. | Multi-head layout processes matched panel sets for case goods and commercial millwork batches. |
Whether scaling a monument business or speeding commercial kitchen fabrication, multi-spindle stone CNC router setups deliver the rigidity and repeatable accuracy required for 24/7 production efficiency. For spindle-count and bed-size selection criteria, see the stone CNC router buyer guide.
Why Source Your China Multi-Heads Stone CNC Router From Us?
Factory-direct china multi-heads stone cnc router supply covers more than hardware — 160-point inspection, OEM table layouts, and remote support keep high-volume US fabrication lines running.
Factory-Direct Advantages & Support
| Feature | Deliverable | Why It Matters To Your Shop |
|---|---|---|
| 160-Point Inspection | Rigorous pre-shipment stress testing under full load conditions. | Squareness and calibration locked in before crating — limits out-of-the-box alignment issues. |
| Custom OEM/ODM Workflows | Tailored machine builds from initial consultation to floor layout. | Exact bed size, spindle count, and clearance heights for specific jobs. |
| Turnkey Setup & Training | On-site installation support paired with comprehensive operator training. | Crews reach production speed faster on complex 3D carving programs. |
| 24/7 Global Support | Round-the-clock remote technical assistance from dedicated engineers. | Real-time troubleshooting keeps production lines moving across time zones. |
Precision Engineering You Can Trust
Every multi-spindle stone CNC router undergoes strict quality controls — sunken, stress-relieved rigid steel beds handle massive granite and quartz slabs without flexing. As a stone CNC machinery manufacturer and supplier, ProMach passes factory-direct engineering value through premium industrial components at competitive ex-factory pricing.
Get Your China Multi-Heads Stone CNC Router Price Today
Ready to scale production efficiency? Itemized ex-factory multi-heads stone cnc router price estimates are built from spindle count, bed size, and optional rotary saw or 5 axis packages — submit the B2B form below for a tailored quote.
Request an Itemized Ex-Factory Quote
- Contact Information: Name, Company Name, Email, and Phone Number.
- Machine Setup: Preferred configuration (Dual-spindle, 3-head, 4-head, or custom pneumatic setup).
- Working Bed Size: Standard 1325 (4×8 Bed), expanded 5×10 heavy-duty platform, or custom dimensions.
- Material & Application: Primary materials — hard granite, marble, quartz countertops, tombstone carving, or mixed furniture making / woodwork panels.
- Add-On Upgrades: 4th-axis rotary attachment or integrated high-speed rotary saw cutting head.
Our Commercial Terms & 1-Set MOQ Policy
B2B stone CNC machinery programs support growing fabrication shops and large industrial factories alike.
| Term | Policy Details |
|---|---|
| Minimum Order Quantity (MOQ) | 1 Set — direct factory pricing on a single machine order. |
| Price Basis | Ex-Factory (FOB, CIF, or DDP shipping options available upon request). |
| Customization | Full OEM/ODM support on spindle counts, motor power, and bed sizes. |
| Inclusions | 160-point pre-shipment testing and 24/7 remote technical assistance on every quote. |
FAQs About China Multi-Heads Stone CNC Router Programs
How many heads can I customize on a single machine?
The china multi-heads stone cnc router platform supports 2, 3, 4, or more pneumatic spindle positions depending on production needs. Most US shops find dual-head or triple-spindle setups balance doubled output with usable cutting area.
Can the machine handle hard granite and quartz without vibration?
Yes — sunken rigid steel beds and Taiwan Hiwin linear guide rails absorb vibration when cutting or carving quartz, granite, and engineered stone. High-torque water-cooled spindle for stone setups maintain chip-free edge profiles and deep reliefs.
What drives the multi-heads stone cnc router price on a quote?
Ex-factory multi-heads stone cnc router price reflects spindle count and kW rating, bed size (1325 vs 5×10), control tier (NC-Studio vs Syntec), and add-ons such as rotary saw heads or 5 axis packages — itemized lines are listed on each factory quote.
Does multi-head layout work for furniture making and woodwork panels?
Yes, for matched batch panels and mixed stone-and-wood inlay work — verify tooling and dust collection for woodwork substrates. Stone-first shops use multi-head lines for furniture making accents; pure soft-wood volume may favor a dedicated wood router instead.
What is the Minimum Order Quantity (MOQ) and delivery timeline?
| Policy / Timeline | Details |
|---|---|
| Minimum Order Quantity (MOQ) | 1 Set |
| Production Lead Time | 15 to 20 working days |
| Shipping & Delivery to the US | 25 to 35 days (door-to-door ocean freight available) |
Every multi-heads stone cnc router undergoes a 160-point stress test before seaworthy plywood crating. Request a quote with spindle count and bed size for an itemized ex-factory price and lead-time confirmation.
Reviews
There are no reviews yet.